Ducato Engine Water Drip Deflectors Versions 1 2 3 5
Fiat Ducato X250 Motor home Engine Bay Water Deflectors to deal with the water leak at the center joint of the scuttle plates. Designed and 3D printed solution to prevent water leaking onto your engine and injectors. Fits Ducato X250,290, Peugeot Boxer and Citroen Relay 2006-2014 Gen3 (Versions 1,2,3). And 2015 to current Gen4 (Versions 2,5). Please look at pictures to check your model looks the same. If you are unsure, please message me. I make 3 versions for Gen3 vans and 2 versions for Gen4 vans. Check out the pictures to choose the one you prefer. If your unsure, just message me with a picture of the front of your van with the bonnet open.
Version 1 (Code EDV1) drains to the front of the engine bay behind the radiator. This is a popular version as you can see the water draining away which is very satisfying. (Will not work on vans with black breather box or control boxes in the way shown in picture No8). Only for 2006-2014 Gen3 Vans
Version 2 (Code EDV2)drains to the back of the engine bay and will fit on all 2006-2014 Gen3 vans, and all 2015-2024 Gen4 vans.
Version 3 and 5 (Code EDV3 or 5) is an enhanced
model of Version 2 and drains to the back. has a wider capture area, as
it wraps around the central mounting bracket. Good if you park on a
steep drive. Version 3 fits all 2006-2014 Gen3 vans. Version 5 fits all
2015-2024 Gen4 vans. Some vans have additional brackets behind the metal
plate that are bolted up behind the scuttle panel. These can be a fiddle
to dismantle. If you don’t feel confident with such dismantling then go
for version 2. Its simpler to fit.
If your van has a black plastic breather box with small pipes mounted on
the same bracket at the center, you will need version 2, 3 or 5 made to
clear this obstacle.
Hopefully the pictures below will help you understand the
differences.
EDV1and 1f are £12. P&P £1.55
EDV2 are £12. P&P £3.75
EDV3 & V5 is £15. P&P £3.75
If you are confused which one is best for you, just email me a picture of the front of your van with the bonnet open showing the area where the deflector fits.
< See all our Fiat Ducato products.
< Return to full product catalogue.
Version Images.
.
.
.
Version EDV1 for Gen3 vans
.
.
.
If you have this add on bracket with a bonnet switch and motor unit attached, you will need Version EDV1f. This accommodates the bracket.
.
.
.
Version EDV1f has a flair at the top to accommodate the add on bracket.
.
.
.
Version EDV1 Fitting Instructions
.
.
.
Version EDV2 for Gen3 & 4 vans With holes or slots
TIP If you undo the 2 nuts, and the back plate drops away easily, choose the holed version. If the plate is still stuck and needs forcing apart, choose the slotted version.
.
.
.
Version 1 and 2 Comparison for Gen3 vans (Picture 8)
.
.
.
Version EDV2 fitting instructions. Yours maybe much simpler to fit than this as some do not have so many brackets to complicate fitting
.
.
.
Version EDV3 & 5 Fitting Instructions