LPG Gas Cap GRIPPER2
Gaslow and Gassit LPG Caps can be a real pain to remove as they get older as the plastic swells. There’s no real way of gripping them firmly to pull them off after turning them. I have designed and 3D Printed a replacement sturdier version that has a slightly smaller diameter to give better clearance and prevent binding. I have also given the gripping area a slight undercut to give you better purchase when pulling it off. You will need to reuse your existing spring unit inside the original cap, but that is easy to do. Instructions are supplied just in case your unsure how to do it. (Keep your old cap. You never know when it might come in handy. Just pop it in your door pocket for safe keeping.)
I can make them in Black or White. With two types of grip bar as used in the original, or if you fancy something a little special, I make one with LPG pressed into it. This does however mean you will need the special LPG key to remove the cap. (at £8).
All Version are £15 + P&P £3.75 Small Parcel
Version 1 Gas Cap Flush
Version 2 Gas Cap Gripper2
Version 3 Gas Cap Key-way + Key-way £8
Email us on chrisatheathpark@yahoo.com
< Return to full product catalogue.
Above, Standard version flush on the left. Proud grip bar on the right for those with arthritis. ‘OR’ Fancy version with LPG pressed into front face below. (You will need the orange LPG key for the fancy version)
Fancy version on the with LPG pressed into front face. (You will need the orange LPG key for the fancy version)
Instructions showing how to remove the spring unit from the old cap and fit to the new one.