Truma & Alde Heater Flue Condensation Deflector

This Design is to help prevent black streaks building up in your bodywork below your Truma & Alde Boiler Flue. The original tends to direct the condensed water from the flue down the bodywork. My idea is to deflect this condensation further away from the body so the water falls straight to the floor. In high winds nothing is going to solve the problem, but the idea is to deflect it the majority of the time reducing those unsightly black streaks.

It is very easy to fit. Just remove the 2 screws holding the flue cowling in place. Pull the cowling off. Pop the deflector onto the back of the flue and screw it back in place. I 3D print them from ASA which easily deals with the hot flue gases.

I can supply them in Grey, Black & Off White.

V1,2 and 3 is for the Deflector only NOT THE FLUE COWLING.

VC1 is a complete cowling with integrated deflector.

Version1 39mm Deflection Combi Boiler 110mm Dia Cowling

Version 2 45mm Deflection Combi Boiler 110mm Dia Cowling

Version 3 Truma & Alde E2000 Cabin Heater 98mm Dia Cowling

Version C1 Complete Cowling for 110mm Dia

Pictures below to help you choose the correct one. Email me if you are unsure.

The prices are

V1 & V3 Β£12+P&P Β£1.55 Total Β£13.55

V2 Β£13+P&P Β£3.75 Total Β£16.75

VC1 Β£29+P+P Β£3.75 Total Β£32.75

Email us on chrisatheathpark@yahoo.com to order.

< Return to full product catalogue.

Version 1. 39mm Deflection 110mm Diameter Cowling. (image above)

Version 2. 45mm Deflection 110mm Diameter Cowling. (image above)

Version 3 Truma & Alde E2000 Cabin Heater 98mm Dia Cowling. (image above)

Colours Off White, Grey, Black.

VC1 Complete Cowling. (image above)

< Return to full product catalogue.