Wifi Router Holders
My Designs and 3D printed holders for WiFi & Routers commonly used in motor homes. Cable connections have been considered and catered for in all the holders. If you have a router not listed hear and are willing to send it to me to use as a pattern, I can make one for you.
WiFi & Router Holder Types catered for so far are
Huawei B535 “Vertical and Horizontal Orientation” £25
Huawei E5577 £10
Huawei E5783 £10
Starlink “Any Orientation” Mounting holes at the back and bottom £25
Zyxel NR5101 5G £25
ZTE MU5001 5G £10
SKY Go TV £15 (COMING SOON)
Apple TV Gen3 £18
P&P £3.75
Images of the routers are for guidance only. ONLY the 3D printed HOLDER is supplied.
Email us on chrisatheathpark@yahoo.com to order.
< Return to full product catalogue.
Huawei E5577 Holder (image above)
.
.
.
Huawei E5783 Holder (image above)
.
.
.
Huawei B535 Vertical Orientation (image above)
Huawei B535 Horizontal Orientation. (image above)
Fitting as follows. Comes in 3 sections. Hole Template. Mounting Plate and Holder Body. Once you have decided on your position and checked that your cables all reach, offer the hole template up to the wall and drill 2x3mm holes. You can use double sided tape on the back of the Mounting Plate if you prefer. The hole template becomes surplus to requirements in this event. With the holes drilled screw the Mounting Plate to the wall with suitable countersunk screws. Now that the Mounting Plate is on the wall you can slide the Holder Body onto the Mounting Plate by aligning the slotted holes with the pre fitted screws. Slide down to lock in place. If you need to remove the holder, just slide it up and gently release from the Mounting Body.
I have designed the mounting in this way so that you can fit the Router and align all the cables in the Holder Body more easily before slotting it into the Mounting Plate on the wall.
.
.
.
Star Link. Can be Mounted Vertical, Horizontal or Upside Down (image above)
.
.
.
ZYXEL NR5101 5G (image above)
.
.
.
ZTE MU5001 5G (image above)
.
.
.
Sky Go Receiver Holder. (image above)
.
.
.
Apple TV Gen3 Holder. (images above)
Version 1 for cable side entry on the left.
Version 2 multiple entry options, Left, Right, Top or Bottom.
.
.
.